What To Do If Your Water Heater Unexpectedly Stops Working

Book Appointment

 

 

Are you looking for insight about Hot Water Heater Repair?


No Hot Water — Water Heater Repair
Many modern residences take advantage of an electric hot water heater for their heating system, because of its ease and simplicity of use. Nonetheless, just like any other electrical devices, problems may develop with its use, all of a sudden. It can be really discouraging to awaken to a cool shower instead of a warm one or having your bathroom with water that isn't hot enough and even also hot. Whatever the case might be, hot water heater problems can be quite stressful. The good news is, we've made a list of possible services to your hot water heater concerns. There are a number of elements that might trigger most of these problems, it could be a problem with the power supply, the electrical heating element, or the thermostat. Before doing anything, guarantee you turn off the main power supply for security. Whatever the trouble is, getting it fixed should not position way too much of a concern if you adhere to these actions:

 

Check Your Power Supply:


As fundamental as this might appear, it is very required. Without appropriate power, your hot water heater will certainly not function. So the first thing to do when your water all of a sudden stops working is to verify that it isn't a power problem. Check if the fuse is blown out or the breaker stumbled. If the breaker is the concern, simply turn it off and on once again. Change any kind of busted or damaged fuse. Evaluate the device with power after these adjustments to see if it's currently functioning.

 

Examine the Burner in the Hot Water Heater:


If it's not a power issue, after that attempt taking a look at your heating element if it is still working. Test each of your heating elements to ensure the trouble isn't with any one of them. If any one of them is malfunctioning, replace that part and then check whether the hot water is back on.

 

Examine Your Thermostat:


If your hot water heater still isn't functioning or the water coming out isn't hot enough, you might require to inspect the temperature settings on your upper thermostat. Make certain the breaker is turned off before doing anything. Open the access panel and also press the red button for temperature reset above the thermostat. This need to aid warm the water. Transform the breaker back on as well as inspect if the issue has been dealt with.

 

Call A Professional:


If after replacing all faulty parts and also resetting your temperature level, the hot water heater still isn't functioning, you may need to contact a specialist plumber for a specialist point of view. The issue with your heating unit could be that the hot and cold faucets have been switched or it may be undersized for the quantity of warm water needed in your home. Whatever the instance might be, an expert plumber would help address the issue.

 

Verdict


Hot water heater issues are not always significant. Many of them result from small issues like a blown fuse or damaged burner. Replacing the faulty components must do the trick. Nonetheless, if you are still incapable to resolve the problem, give a call to your local plumber to find to get it fixed.

 

8 possible reasons why you have no Hot Water

 

Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.

 

Water Leak

 

Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.


Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.

 

Gas Heater: Gas Leak

 

If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.

 

Gas Heater: Pilot Light Problems

 

There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.


Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.

 

Gas Heater: Faulty Thermocouple

 

The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.

 

Electric Heater: Breaker Blues

 

Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.

 

Electric Heater: Reaching The Limit

 

If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.

 

Electric Heater: Heating Element

 

If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


What Would Cause My Electric Water Heater to Stop Working?

 

Hopefully you enjoyed our post on No Hot Water — Water Heater Repair. Thanks a lot for taking the time to read through our content. Do you know another individual who is serious about the niche? Feel free to promote it. Bless you for your time. Come back soon.




Schedule Here
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “What To Do If Your Water Heater Unexpectedly Stops Working”

Leave a Reply

Gravatar